As we know, pipe and drape is a very versatile tool, it can be utilized into many, many occasions. The parts of a pipe and drape system, like curtains and drapes or pipe and drape stands, backdrops, photo curtains.

Most aluminum pipe and drape system are labeled as 1.5'' or 2'' diameter types. And the cross bar on both types is almost always 1.5''.

Some statistics show the 2'' pipe and drape are somewhat more durable, and they are the more commonly seen type in rental organizations, indoor decorations contractors, or party planner.

Actually, there are two basic types of a pipe and drape system: Slip fit and screw in. The screw in type are some what out-dated and its uprights are unadjustable. In the process of setting up, the uprights are "screwed in" to the bases. There is a high possibility that the ends of the uprights or the bases will be damaged over time.


There's another type: slip fit pipe and drape. If you are doing exhibitions, trade shows or other events, you might see this a lot. They use metal pins to stabelize the uprights into the base, therefore, the height is adjustable. This type of pipe and drape have several advantages : first, flexible; second, the setting up process is really quick and convenient; third, the parts are less likely to be damaged than screw in pipe and drape. But you should notice that not every upright is fit in all the bases. As we mentioned, there 1.5'' pipe and drape and 2'' pipe and drape, make sure your sizes are correct before you decided to set up a pipe and drape system.

Where can I get a pipe and drape, you might wonder, well a good pipe and drape manufacturer is always a good choice, also, if you need more pipe and drape informations, check here.